New Mercedes Benz WIFI MB SD Connect Compact 5 diagnostic tool for cars and trucks with/without software are available in mbstartool.com.
Top features of the new MB SD C5
1. Support wifi
2. Supported Multi-Language: English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/
Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese
3. Supports Mercedes Benz Cars & Trucks 2000 up
4. Supports Offline and Online Programming, If You Want to Do Online, Please Buy This Online SCN Coding Service
Software includes: (Version: 2015.12)
1. D-A-S / Xentry 2015.12 : the automatically Diagnosis Assistance
System ,Concise interface and straightforward operation with IB M
high-quality computer can realize the quick and accurate code reading
and the whole car system testing
2. W-I-S net 2015.12: Workshop Information System Supply the whole view
of the wiring diagram in a car,component location diagram and
maintenance method. What you do is to enter the chassis number, and then
you will get the manufacture data, engine configuration and the car
model -all in detail.
3. EPC.net : Electronic Parts Catalog
4. ST Finder 2008:Part location finder
5. STARUTILITIES : the movement management system and self-test
6, SDMEDIA 2014
7, PL69
Tuesday, October 15, 2019
Tuesday, October 8, 2019
MB SD Connect C4/C5 Star Diagnosis tool cannot measure the car
The customer connected the Mercedes-Benz to be tested, opened the MB SD Connect C4/C5 xentry software, and selected the corresponding model. The final step of the test is as follows:
The above problem occurred and the hardware of MB SD Connect C4/C5 was not found. Generally there are three problems:
1. MB SD Connect C4/C5 host problem
2. MB SD Connect C4/C5 network cable problem
3. Computer problem with MB SD Connect C4/C5
The customer connects to the host and computer of the MB SD Connect C5/C4 via a network cable. The host’s MB SD Connect C4/C5 host screen is displayed as follows:
From the display prompt: Device not in use
As you can see, MB SD Connect C4/C5 does not work.
Look at the icon in the red circle: This display is the MB SD Connect C4/C5 host is not connected to the computer.
If the MB SD Connect C4/C5 host is connected to the computer, the icon should look like this:
That may be because
1, network cable problem
2, the network card is broken
3, the network card driver has a problem
Solution:Replace a new network cable (common with ordinary network cable)
1. If you replace the new network cable and the connection is normal as shown below, the original network cable is damaged.
2. If you change the network cable or the following is displayed: that is, the computer’s network card or network card driver has a problem.
3. If it is a driver problem, reinstall the NIC driver to solve it.
4. If the NIC driver is reinstalled, the problem remains the same. That is the problem with the network card, please check or replace the new network card to solve.
At the same time, if your MB SD Connect C4/C5 hardware can be connected to the car, the lower right corner of your computer will display as follows:
If the MB SD Connect C4/C5 hardware is not connected to the car and computer, or if the hardware is not found after the connection, it will be displayed as follows:
If you still have problem to use MB SD Connect C4/C5 Star Diagnostic tool, please contact our sales.
The above problem occurred and the hardware of MB SD Connect C4/C5 was not found. Generally there are three problems:
1. MB SD Connect C4/C5 host problem
2. MB SD Connect C4/C5 network cable problem
3. Computer problem with MB SD Connect C4/C5
The customer connects to the host and computer of the MB SD Connect C5/C4 via a network cable. The host’s MB SD Connect C4/C5 host screen is displayed as follows:
From the display prompt: Device not in use
As you can see, MB SD Connect C4/C5 does not work.
Look at the icon in the red circle: This display is the MB SD Connect C4/C5 host is not connected to the computer.
If the MB SD Connect C4/C5 host is connected to the computer, the icon should look like this:
That may be because
1, network cable problem
2, the network card is broken
3, the network card driver has a problem
Solution:Replace a new network cable (common with ordinary network cable)
1. If you replace the new network cable and the connection is normal as shown below, the original network cable is damaged.
2. If you change the network cable or the following is displayed: that is, the computer’s network card or network card driver has a problem.
3. If it is a driver problem, reinstall the NIC driver to solve it.
4. If the NIC driver is reinstalled, the problem remains the same. That is the problem with the network card, please check or replace the new network card to solve.
At the same time, if your MB SD Connect C4/C5 hardware can be connected to the car, the lower right corner of your computer will display as follows:
If the MB SD Connect C4/C5 hardware is not connected to the car and computer, or if the hardware is not found after the connection, it will be displayed as follows:
If you still have problem to use MB SD Connect C4/C5 Star Diagnostic tool, please contact our sales.
Subscribe to:
Posts (Atom)